通过宽线固体核磁共振氢谱研究半晶高分子的相结构

宽线固体核磁共振氢谱（¹H NMR）是一种研究半晶高分子相结构的经典方法.本文以半晶聚乙烯的宽线固体¹H NMR谱为例，探讨了通过Gaussian/Sinc、Gaussian和Lorentzian函数组合对宽线固体¹H NMR谱图进行拟合的方案，并根据半晶聚乙烯的相结构成分对拟合得到的各信号成分进行归属.并在此基础上探讨了各个相结构中分子链运动与信号线型的相关性，以及利用宽线固体¹H NMR谱测量半晶高分子结晶度存在的困难.     

基于持续同调的边坡土颗粒应力链失稳分析

采用颗粒离散元方法和持续同调理论,研究了内排土场堆叠至不同高度时的边坡稳定性。为便于研究,现采用一水平金属板向下施加压力,代替不同厚度土层的重力荷载,对边坡在竖向荷载作用下的失稳破坏过程进行了颗粒离散元模拟。研究了二维边坡土颗粒速度总矢量、边坡失稳破坏时滑移开裂面的角度以及边坡坡顶y方向的平均速度等宏观响应过程,并构建了自然堆积下边坡堆积体颗粒的法向力链无向网络模型。最后,用持续同调方法对边坡坡顶颗粒接触力链网络的拓扑特征进行分析,获得条码图,建立了岩体结构持续同调特征与失稳演化的关系。本文为研究边坡失稳拓扑识别提供了一种新方法,从而可以有效预测边坡的失稳破坏。     

基于利他偏好的电商供应链最优决策与契约协调

构建了由一个占主导地位的电商平台和一个处于跟随地位的制造商组成的Stackelberg主从博弈模型,研究了电商平台有无利他偏好时电商供应链的最优决策和契约协调问题,并通过数值算例验证了本文的主要结论.研究表明:电商平台的利他偏好行为能够促使自身服务水平提高、正向影响制造商的最优销售价格并削弱自身利润.但电商平台的让利行为能够提高制造商的利润水平、缓和供应链冲突并改善供应链整体绩效."销售佣金比例+服务成本共担"契约能够完美的协调电商供应链,使双方最优利润获得帕累托改进,从而保证电商平台有足够的激励执行利他偏好行为.另外,进一步分析发现电商平台的利他偏好正向影响制造商支付给电商平台的固定技术服务费、制造商占有的电商供应链利润份额和服务成本分担比例,负向影响自身的销售佣金比例.     

A facile approach to fabricate and embed multifunctional nano ZnO into soap matrix and liquid cleansing products for enhanced antibacterial and photostability for health and hygiene applications

This research demonstrates, a facile approach to fabricate the nano ZnO system in an unique combination of surfactant-polyol-assembly (SPA) acting as a caging agent restricting the ZnO crystallite size in nano-regime. This SPA is suitable for health and hygiene products and such optimized technique is among the very few researches exploring the impact of embedding low concentrations of nano ZnO system into the matrix of sodium salt of long chain fatty acids (soap bar) and liquid cleansing personal care products. The fabricated nano ZnO in SPA and infused products were systematically characterized using various advanced and appropriate techniques. The hexagonal wurtzite structure of nano ZnO-SPA is evaluated based on XRD pattern which also exhibit an average crystallite size as 20.18 nm and high specific surface area as 52.99 m²/g. The SEM-supported morphological assessment confirms the formation of agglomerates of ultrafine ZnO rods and spherical particles. Novel nano ZnO having wideband gap energy (3.66 eV) embedded in soap bar act as a UV-blocker preventing the oxidation of unsaturated long chain fatty acids. Soap bar without ZnO experienced degradation and reduction in whiteness to 17.85% whereas 2.5 mg/g nano ZnO infused soap shows the reduction to 7.9% which clearly reflects the increased photostability of soap bar. The antibacterial efficacy of nano ZnO-SPA and infused products are investigated against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) by Zone of Inhibition (ZOI) and European standard EN:1276. Infused products exhibited high antibacterial efficacy up to 4.43 log reduction equivalent to >99.99% germ kill.     

Kinetic model for Ostwald's rule of stages with applications to Boc-diphenylalanine self-assembly

A kinetic model which describes Ostwald's rule of stages, during the process of crystal growth from solution, is reported here. Reaction equations for stages are given where the stages convert from one to another. The final stage reacts to release a portion of solute back into solution, while the remainder converts to the final equilibrium form. Additionally, a remnant of the solute that was not consumed by any of the transitional stages, ultimately is converted into the final product. This particular model was motivated by a recent report for Boc-diphenylalanine self-assembly where the dissolved peptide was observed to go through two polymorphic stages before reaching the equilibrium supramolecular assembly [A. Levin et al., Nat. Commun. 5, 5219, (2014)]. Kinetic data for the concentration of solute present during the process are listed in the above-mentioned report. We show here how the model, for , describes the time-dependent behavior of the solute decay during the growth process. After comparing the model to the experimental data, we are able to report values for all of the rate constants and propose a rule whereby the relative magnitudes of these constants can be used to predict whether a supersaturated substance will noticeably pass through transitional stages or simply convert from solute to the equilibrium solid form.     

Synthesis of well‐defined,soluble poly(3‐alkyl‐4‐benzamide) by chain‐growth condensation polymerization

Well‐defined poly(3‐alkyl‐4‐benzamide) was synthesized by means of chain‐growth condensation polymerization of phenyl 3‐octyl‐4‐(4‐octyloxybenzyl(OOB)amino)benzoate ( 1c ) from initiator 2 , followed by removal of the OOB groups on amide nitrogen of poly 1c . Polymerization of 1c with phenyl 4‐(trifluoromethyl)benzoate ( 2b ) in the presence of 1,1,1,3,3,3‐hexamethyldisilazide (LiHMDS) and LiCl in THF at ?10 °C gave poly 1c with a narrow molecular weight distribution (M_w/M_n ≤ 1.08) and a well‐defined molecular weight (M_n = 4480–12,700) determined by the feed ratio of monomer to initiator (from 10 to 30). The OOB groups of poly 1c were removed with H₂SO₄ to give the corresponding N‐unsubstituted poly(p‐benzamide) (poly 1c′ ) with low polydispersity. The solublity of poly 1c′ in polar organic solvents was dramatically higher than that of poly(p‐benzamide), demonstrating that introduction of an alkyl group on the aromatic ring is very effective for improving the solubility of poly(p‐benzamide). © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 360–365     

Effect of chain architecture on the phase transition of star and cyclic poly(N‐isopropylacrylamide) in water

The heat‐induced phase transition of aqueous solutions of Poly(N‐isopropylacrylamide) (PNIPAM) in water is examined for a four‐arm PNIPAM star (s‐PNIPAM), a cyclic PNIPAM (c‐PNIPAM), and their linear counterparts (l‐PNIPAM) in the case of polymers (1.0 g L^?1) of 12,700 g mol^?1 < M_n < 14,700 g mol^?1. Investigations by turbidity, high‐sensitivity differential scanning calorimetry (HS‐DSC), and light scattering (LS) indicate that the polymer architecture has a strong effect on the cloud point (T_c: decrease for s‐PNIPAM; increase for c‐PNIPAM), the phase transition enthalpy change (ΔH decrease for s‐PNIPAM and c‐PNIPAM), and the hydrodynamic radius of the aggregates formed above T_c (R_H: c‐PNIPAM < s‐PNIPAM < l‐PNIPAM). The properties of s‐PNIPAM are compared with those of previously reported PNIPAM star polymers (3 to 52 arms). The overall observations are described in terms of the arm molecular weight and the local chain density in the vicinity of the core of the star, by analogy with the model developed for PNIPAM brushes on nanoparticles or planar surfaces. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2059–2068.     

Surplus division and investment incentives in supply chains: A biform-game analysis

In this paper, we use a biform-game approach for analyzing the impact of surplus division in supply chains on investment incentives. In the first stage of the game, firms decide non-cooperatively on investments. In the second stage, the surplus is shared according to the Shapley value. We find that all firms have inefficiently low investment incentives which, however, depend on their position in the supply chain. Cross-subsidies for investment costs can mitigate, but not eliminate the underinvestment problem. Vertical integration between at least some firms.yields efficient investments, but may nevertheless reduce the aggregated payoff of the firms. We show how the size of our effects depends on the structure of the supply chain and the efficiency of the investment technology. Various extensions demonstrate that our results are qualitatively robust.     

Carbon fibers prepared from tailored reversible‐addition‐fragmentation transfer copolymerization‐derived poly(acrylonitrile)‐co‐poly(methylmethacrylate)

Reversible‐addition fragmentation‐transfer (RAFT) polymerization of acrylonitrile (AN) was performed with 2‐(2‐cyano‐2‐propyl‐dodecyl)trithiocarbonate as RAFT agent and azobis(isobutyronitrile) as initiator. Linear polyacrylonitrile (M_n = 133,000 g/mol, PDI = 1.34) was prepared within 7 h in 86% isolated yield. High‐yield copolymerization with methyl methacrylate (MMA) was performed and copolymerization parameters were determined according to Kelen and Tüdös at 90 °C in ethylene carbonate yielding r_AN = 0.2 and r_MMA = 0.42. The molecular weights, polydispersity indices (PDIs), and MMA content of the copolymer were adjusted in a way that precursor fibers could be prepared via wet spinning. These precursor fibers had round cross‐sections and a dense morphology, showing tenacities of 40–50 cN/tex and elastic moduli of 900–1000 cN/tex at a fineness of 1 dtex and an elongation of 13–17%. Precursor fibers were oxidatively stabilized and then carbonized at different temperatures. A maximum tensile strength of 2.5 GPa was reached at 1350 °C. Thermal analysis, infrared and Raman spectroscopy, wide‐angle X‐ray scattering, scanning electron microscopy, and tensile testing were used to characterize the resulting carbon fibers. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1322–1333     

Electrolytes for quasi solid‐state dye‐sensitized solar cells based on block copolymers

The first use of PS_n‐b‐PEO_m‐b‐PS_n block copolymers (PS = polystyrene, PEO = poly(ethylene oxide)) as solid hosts for iodine/iodide electrolytes in dye‐sensitized solar cells (DSSCs) is described. Using the benchmark photosensitizer N719, DSSC based on the quasi solid‐state electrolytes afforded efficiencies up to 6.7%, to be compared with an efficiency of 7.3% obtained in similar conditions with a conventional iodine/iodide liquid electrolyte. By varying the PS:PEO relative volume ratio in the block copolymers different properties and morphologies were obtained. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 719–727